book collections email follower instructable user
Picture of Steam Punk Goggles

OK, I know, it's been a while since I published my last Instructable, but hey, a guy gets busy.

Any how, here is a fun little project I decided to take on. I needed a pair of goggles to go with my leather steam punk top hat. After reading countless articles on how to make them I figured I may as well reinvent the wheel. So follow along and, as with all my Instructables, look to the image notes for the fine details.

Step 1: Design and lay out

To begin my design process I first needed to secure the bits I would be mounting the lenses in. In my case I chose a couple of 1 1/2 inch PVC plumbing fixtures. These are the bits that attach the drain tail piece to the P trap under a sink.I lined them up on a piece of plane paper, space them about 1/2 inch apart and drew my pattern.

Mad Props2 years ago

Well done. Very precise. One of the best tutorials I've see for Steam Punk Goggles.

These are absolutely fantastic!

friger (author)  Fuzzy Monkey2 years ago

Thank you!