book collections email follower instructable user
Screenshot_1.jpg

I had some pallet wood leftover from an earlier project so I made this easy but handy kubotan from pallet wood.

The wood itself happened to be oak, so I wanted to use it rather than throwing it away. This project requiers a few tools and no lathe.

If you want to know what a kubotan is I recommend this article : https://en.wikipedia.org/wiki/Kubotan

Step 1: I Cut the Wood to Size

Picture of I Cut the Wood to Size

The finished kubotan would be around 14 cm long and 2 cm thick. So I start with an oversized piece, around 18 cm and 2,5 cm thick. If you dont have a bandsaw, you could use a ordinary handsaw.